Planet VoIP Analog Telephone Adapter VIP-157S User Manual page 26

Dial Now
Auto Dial Time
Use # as send key
Use * for IP dialing
Descriptions of example:
Example_1: Drop prefix: No, Replace rule 1: 002, +: 1234+4321 (No limit the digit length)
1. If the dialing number is start as "1234", it will add the 002 at begin. The real dialing number is
[0021234...].
2. If the dialing number is start as "4321", it will add the 002 at begin. The real dialing number is
[0024321...].
Example_2: Drop prefix: Yes, Replace rule 2: 006, +: 002+003+004 (No limit the digit length)
1. If the dialing number is start as "002", it will replace 002 by 006. The real dialing number is
[006...].
2. If the dialing number is start as "003", it will replace 003 by 006. The real dialing number is
[003...].
Example_3: Drop prefix: No, Replace rule 3: 007, +: 5xxx+35xx (Has limit the digit length)
1. If the dialing number start as "5" and follow 3 digits, it will add the 007 at begin. The real
dialing number is [0075xxx].
2. If the dialing number start as "35" and follow 2 digits, it will add the 007 at begin. The real
dialing number is [00735xx].
the max length is 40.
- Symbol: It only accept the [+], [x]
- +: It means as "or". For example, [123+456+334+5xx] even if
[123 or 456 or 334 or 5xx]
- x: It is equal to 0~9. For example, [5xx] even if the number
begin 5.
If the dialing number are match with this field, it will dial out and need
not to press the "#" key to end the dialing. It accepts the numeral or
symbol, and the max length are 124.
Note: The starting number can't be the "0". For example, if the
number is "0xxxx", because the starting number is "0", so that the
system will ignore this dial plan.
Stop dialing after seconds then send dial number out.
If setup as Yes, the symtem sill stop to receive the dialing number
when receive the [#] key. The system also will to determine the Auto
Dial Time, it will carry out the calling if there isn't receive the digit after
the Auto Dial Time.
If setup as No, the system just according to the Auto Dial Time to
determine the end time.
If setup as Yes, the system will look on [*] as [.]. For example, if dial
the "192*168*0*100#", it will dial out as "192.168.0.100#".
If setup as No, it just look on [*] as [*]. For example, if dial the "700*#",
it will dial out as "700*#".
26