Computer Setup—Security
NOTE:
Support for specific Computer Setup options may vary depending on the hardware configuration.
Table 5-3
Computer Setup—Security
Option
Setup Password
Power-On Password
Device Security
USB Security
Slot Security
Network Boot
System IDs
Description
Allows you to set and enable a setup (administrator) password.
NOTE:
If the setup password is set, it is required to change Computer Setup options, flash the ROM, and
make changes to certain plug and play settings under Windows.
Allows you to set and enable a power-on password. The power-on password prompt appears after a power
cycle or reboot. If the user does not enter the correct power-on password, the unit will not boot.
Allows you to set Device Available/Device Hidden (default is Device Available) for:
System audio
●
NOTE:
Set this value to 'Device hidden' to disable all system volume.
Network controller
●
NOTE:
You must disable AMT before trying to hide the network controller.
Onboard card reader
●
●
SATA ports
Allows you to set Enabled/Disabled (default is Enabled) for:
●
Front USB Ports
Rear USB Ports
●
●
Internal USB Ports
Allows you to disable the mini card slot. Default is enabled.
Enables/disables the computer's ability to boot from an operating system installed on a network server.
Default is enabled.
Allows you to view:
●
Product Name
●
Serial Number
●
Universal Unique Identifier (UUID) number. The UUID can only be updated if the current chassis serial
number is invalid. (These ID numbers are normally set in the factory and are used to uniquely identify
the system.)
●
SKU Number
●
Family Name
●
Feature Byte
●
Build ID
●
Keyboard locale setting for System ID entry.
Computer Setup (F10) Utilities
69