Removing An Lcd Fru For Models Without Touch Panel; 2010 Lcd Bezel Assembly - Lenovo ThinkPad P70 Hardware Maintenance Manual

Applying labels to the base cover assembly:
The new base cover assembly is shipped with a kit containing labels of several kinds. Apply those labels
when you replace the base cover assembly. For the labels that are not shipped with the new base cover
assembly, peel them from the old base cover assembly, and adhere them to the new one.
The following illustration shows the location of each label.
1
2
3
4
5
6
1
COA label
3
Wireless label for special bid
5
S/N label
7
Information label
9
IMEI label
11
SIRIM label (for Malaysia)
13
GEO label for China
15
Indonesia Rating label
17
Swiss SIM ICCID label

Removing an LCD FRU for models without touch panel

This section provides instructions on how to remove an LCD FRU for models without touch panel.

2010 LCD bezel assembly

Read "Before servicing the computer" on page 70 first.
For access, remove this FRU:
• "1020 Bottom cover" on page 72
• "1090 Keyboard" on page 77
• Memory module bracket (See "1100 Memory module bracket and memory module (under the keyboard)"
on page 78.)
• "1120 Keyboard bezel assembly, fingerprint reader cable, trackpad cable, and color sensor cable"
on page 80
• "1140 Speaker assembly" on page 84
• "1150 LCD unit" on page 85
Important: Once an LCD bezel assembly is removed, it cannot be used anymore. A new LCD bezel
assembly is required for replacement.
98
ThinkPad P70 Hardware Maintenance Manual
9
2
GEO label
4
GEO label for Taiwan
6
System label
8
FCC WLAN label
10
ISRAEL label or Brazil Anatel label
12
CECP label
14
China WWAN label
16
Indonesia Postel label
10
11
12
13
14
15
16
17