Internal Connectors - Asus ROG ZENITH EXTREME Manual

1.1.9

Internal connectors

1. AMD Serial ATA 6 Gb/s connectors (7-pin SATA6G_12; SATA 6G_34;
®
SATA 6G_56)
These connectors connect to Serial ATA 6.0 Gb/s hard disk drives via Serial ATA 6.0
Gb/s signal cables.
If you installed Serial ATA hard disk drives, you can create a RAID 0, 1, and 10
configuration through the onboard AMD
•
•
•
1-16
These connectors are set to [AHCI] by default. If you intend to create a Serial ATA
RAID set using these connectors, set the SATA Mode Selection item in the BIOS to
[RAID].
Before creating a RAID set, refer to section RAID configurations or the manual
bundled in the motherboard support USB.
When using NCQ, set the SATA Mode in the BIOS to [AHCI]. Refer to section SATA
Configuration for details.
X399 chipset.
®
Chapter 1: Product Introduction