Motion Detection Alarm - Planet DVR-1670 User Manual

5.10 Motion Detection Alarm

If you enable this function, when there is motion detected, DVR will make alarm.
Step 1：Enter into "Image Setup" menu：
Step 2：Select camera：Use【 】 【 】key to select one camera.
Step 3：Select motion detection sensitivity：On the right side of "Motion Det. Level" item,
there is a list box. That is motion detection sensitivity. There are 7 options, from 0 (the lowest)
to 5 (the highest) and "Off". You can use【↑】 【↓】keys to select one. If you select "Off"
option, DVR will not response even if there is motion detection. If you select other options, it
will active "Motion Area Setup" button and "Policy Setup" button. If you select low
sensitivity such as 0, only when there are great motion detection, DVR can response. On the
other side, for high sensitivity such as 5, DVR will response with small motion detection.
Step 4：Motion area setup：You must define motion areas so that DVR will response when
there is motion in those areas. Move "Active Frame" to "Area" buton on the right side of
sensitivity list box, press【ENTER】key, you can enter into "Motion Area Setup" interface.
Page 51