Table of Contents
Advertisement
Buttonholes
> Touch the icon «Buttonhole slit width».
0.6
> Turn the «Upper Multifunctional knob» or the «Lower Multifunctional knob» to adjust the buttonhole slit
9.8 Determining the buttonhole length
The button can be centered in the yellow circle in the lower portion of the display. The yellow circle can
be enlarged or downsized with the «Multifunctional knobs up/down» and the diameter of the button
can be determined in this way.
Additionally to the diameter of the button, 2 mm are added automatically for the buttonhole length. If the
diameter of the button is 14 mm, the buttonhole length is calculated 16 mm.
Prerequisite:
• The Buttonhole foot with slide No. 3A is attached.
> Touch the icon «Buttonholes».
> Select the buttonhole.
> Touch the icon «i»-Dialog.
> Touch the icon «Adjust the buttonhole length».
16.0
> Turn the «Upper Multifunctional knob» or the «Lower Multifunctional knob» to adjust the buttonhole
9.9 Using the stitch counter function
The stitch counter function is suitable for all types of buttonholes. The left buttonhole bead is sewn forward,
the right buttonhole bead is sewn in reverse. If alterations of the balance are made, the stitch counter
function has to be saved for every buttonhole separately.
Prerequisite:
• The Buttonhole foot No. 3C (optional accessory) is attached.
> Touch the icon «Buttonholes».
> Select the buttonhole.
> Touch the icon «i»-Dialog.
> Touch the icon «Program the length with the stitch counter».
> Sew the desired buttonhole length.
123
REC
> Stop the machine.
> Push the button «Quick reverse» so that the machine sews the lower bartack and the second bead in
> Stop the machine at the height of the first stitch.
> Push the button «Quick reserve» again so that the machine sews the upper bartack and the securing
134
width as desired.
length.
reverse.
stitches.
–
The length of the buttonhole remains saved and every subsequent buttonhole is sewn identically until
the machine is switched off.
Advertisement
Table of Contents
