TP-Link Archer VR600v User Manual page 59

Chapter 8
¾ To Set up Authentication for Data Security
You can set up authentication for your USB device so that network clients will be
required to enter username and password when accessing the USB disk.
1. On the Sharing Account part, Choose Use Default Account or Use New Account.
The user name and password are both admin for Default Account. If your choose
Use New Account, you have to customize the username and a password.
Note:
For Windows users, do not set the sharing username the same as the Windows username. Otherwise, Windows
credential mechanism may cause the following problems:
• If the sharing password is also the same as the Windows password, authentication will not work since the Windows will
automatically use its account information for USB access.
• If the sharing password is different from the Windows password, the Windows will be unable to remember your credentials
and you will always be required to enter the sharing password for USB access.
2. Enable Authentication
• If you leave Share All
folders.
• If Share All is disabled, enable
to apply the account you just set.
enabled, click the button to enable
Authentication
Authentication
for specific folders.
USB Settings
for all
54