TP-Link Archer VR600v User Manual page 34

Chapter 6
Advanced: Click to have more configuration.
5. In the Area Code
or region. This can spare you the trouble of including the area code each time you
make a local call over the internet.
6. Click Save to make the settings effective.
Advanced: Click to have more configuration.
To have more configuration on telephony settings
Click Advanced under
Bound Interface: Bound Interface decides where to send/receive the VoIP traffic. An
easy way to select the interface is to check the location of the SIP (Session Initiation
Protocol) server. If it locates somewhere on the internet then select Any_WAN. If it is on
the local network, select LAN.
Locale Selection: Select a country where you are located. The modem router is
embedded with some default parameters according to different countries such as ring
tones. The default country is Germany.
DSCP for SIP/RTP: DSCP (Differentiated Services Code Point) is the first 6 bits in
the ToS byte. DSCP marking allows users to assign specific application traffic to be
executed in priority by the next Router based on the DSCP value. Select DSCP for the
SIP (Session Initiation Protocol) and RTP (Real-time Transport Protocol) respectively. If
you are unsure, please always keep the default value.
section, enable this function and enter the area code of your city
Advanced Settings to configure more telephony settings.
Telephony
29