TP-Link Archer VR600v User Manual page 15

Chapter 2
Computer
Connections are available
Wireless Network Connection
TP-Link_XXXX
TP-Link_XXXX_5G
Connect automatically
√
Method 3: Use the WPS button
Wireless devices that support WPS, including Android phones, tablets, most USB
network cards, can be connected to your router through this method. (WPS is not
supported by iOS devices.)
Note:
The WPS function cannot be configured if the wireless function of the router is disabled. Also, the WPS function will be
disabled if your wireless encryption is WEP. Please make sure the wireless function is enabled and is configured with the
appropriate encryption before configuring the WPS.
1 ) Tap the WPS icon on the device's screen.
2 ) Immediately press the WPS button on your modem router.
3 ) The wireless LEDs flash for about two minutes during the WPS process.
4 ) When the wireless LEDs stabilize and remain on, the client device has
successfully connected to the modem router.
< Settings
Wi-Fi
CHOOSE A NETWORK...
TP-Link_XXXX
Connect
TP-Link_XXXX_5G
Other...
Connect the Hardware
Smart Device
Wi-Fi
10