JVC KD-S845 Service Manual page 9

2.2.2 Removing the loading motor
(See Fig.3 to 5)
• Rrior to performing the following procedure, remove the CD
mechanism control board.
(1) Remove the two springs f attaching the CD mechanism as-
sembly and the front bracket.
(2) Remove the two screws B and the front bracket while pull-
ing the flame outward.
(3) Remove the belt and the screw C from the loading motor.
CD mechanism control board
f
Loading motor Front bracket
Fig.3
Pull outward
Flame
Fig.4
Loading motor
Fig.5
f
B
Front bracket
Pull outward
C
Belt
(No.49858)1-9