D-Link DES-3028 Cli Reference Manual page 330

DES-3028 DES-3028P DES-3028G DES-3052 DES-3052P Layer 2 Fast Ethernet Switch CLI Reference Manual
Example usage
To enable address_binding dhcp_snoop:
DES-3028P:4# enable address_binding dhcp_snoop
Command: enable address_binding dhcp_snoop
Success.
DES-3028P:4#
disable address_binding dhcp_snoop
Purpose
Syntax
Description
Parameters
Restrictions
Example usage
To disable address_binding dhcp_snoop:
DES-3028P:4# disable address_binding dhcp_snoop
Command: disable address_binding dhcp_snoop
Success.
DES-3028P:4#
clear address_binding dhcp_snoop binding_entry
Purpose
Syntax
Description
Parameters
Restrictions
Used to disable address_binding dhcp_snoop.
disable address_binding dhcp_snoop.
This command is used to disable the function which allows entries to be
created by the DHCP packet.
None.
Only Administrator-level users can issue this command.
To clear the address binding entries learned for the specified ports.
clear address_binding dhcp_snoop binding_entry ports [<portlist> |
all]
To clear the address binding entries learned for the specified ports.
<portlist> – Specifies the list of ports that you would like to clear the
dhcp-snoop learned entry.
Only Administrator-level users can issue this command.
325