D-Link DES-3028 Cli Reference Manual page 295

DES-3028 DES-3028P DES-3028G DES-3052 DES-3052P Layer 2 Fast Ethernet Switch CLI Reference Manual
config limited_multicast_addr ports
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure ports 1,3 to set the multicast address profile 2:
DES-3028P:4# config limited_multicast_addr
profile_id 2
Command: config limited_multicast_addr
profile_id 2
Success.
DES-3028P:4#
show limited multicast address
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the limited multicast address range:
DES-3028P:4#show limited_multicast_addr ports 1,3
Command: show limited_multicast_addr ports 1,3
Max Multicast Filter Group:
Port: 1
Profile Id:
Used to configure the multicast address filtering function on a port.
config limited_multicast_addr ports <portlist> {[add | delete ]
[profile_id <value 1-24> | profile_name <name 1-32> ] }
Used to configure the multicast address filtering function on a port.
When there are no profiles specified with a port, the limited function
is not effective.
When the function is configured on a port, it limits the multicast
group operated by the IGMP or MLD snooping function and layer 3
function.
<portlist>  A range of ports to config the multicast address filtering
function.
add  Add a multicast address profile to a port.
delete  Delete a multicast address profile to a port.
profile_id  A profile to be added to or deleted from the port.
Only Administrator-level users can issue this command.
Used to show per-port Limited IP multicast address range.
show limited_multicast_addr { ports <portlist> }
The show limited multicast address command allows you to show
multicast address ranges by ports.
When the function is configured on a port, it limits the multicast
groups operated by the IGMP or MLD snooping function and layer 3
function.
<portlist>  A range of ports to show the limited multicast address
configuration.
None.
290
ports 1,3 add
ports 1,3 add