Self-Diagnosis Function; Self-Diagnosis Display - Sony DCR-IP1 Service Manual

1-4. SELF-DIAGNOSIS FUNCTION

1-4-1. Self-diagnosis Function
When problems occur while the unit is operating, the self-diagnosis
function starts working, and displays on the LCD what to do. This
function consists of two display; self-diagnosis display and service
mode display.
Details of the self-diagnosis functions are provided in the Instruction
manual.
LCD
C : 3 1 : 1 1
Repaired by:
C : Corrected by customer
H : Corrected by dealer
E : Corrected by service
engineer
Blinks at 3.2Hz
C 3 1 1 1
Block
Refer to 1-4-3. Self-diagnosis Code Table .
Indicates the appropriate
step to be taken.
E.g.
31 ....Reload the tape.
32 ....Turn on power again.

1-4-2. Self-diagnosis Display

When problems occur while the unit is operating, the counter of the
LCD shows a 4-digit display consisting of an alphabet and numbers,
which blinks at 3.2 Hz. This 5-character display indicates the
"repaired by:", "block" in which the problem occurred, and "detailed
code" of the problem.
Detailed Code
1-3
DCR-IP1/IP1E