Pairing On Widcomm Bluetooth Stack - Lenovo ThinkPad Bluetooth Laser Mouse User Manual

3. Press the button on the bottom of the USB Bluetooth dongle until the LED begins to flash
once every second. This indicates the. Bluetooth dongle has started to search for device to
be paired.( This mouse will be sold without dongle.)
4. Move your mouse to ensure they are connected.
Enabling the function of USB mouse in BIOS
If the mouse failed to work (refer to "7 Troubleshooting" on page 14 for more probable
conditions), check that the USB function of the mouse has been enabled in the BIOS setup.
Some old PC systems do not support the USB keyboard/mouse in
BIOS/DOS environment.

4.2 Pairing on WIDCOMM Bluetooth Stack

Before using the Bluetooth stack for mouse pairing, install the stack as instructed in "3 Installing
and Uninstalling the WIDCOMM Bluetooth Stack" . Then follow the steps below.
1. Press the USB Bluetooth dongle button until the following Human Interface Device (HID) screen
appears.