Osd Main Menu - Planar PL190M Manual

OSD Main Menu

For screen adjustments, press the [Menu] button to display the OSD (On-Screen Display)
Main Menu shown below. Press the [+] or [ ] button to scroll up or down the menu to your
required options. Please note that the OSD will automatically turn off in 30 seconds without
any manipulation or by simply pressing the [Menu] button for 2 seconds.
CONTRAST
Adjusts the contrast level of the screen image. Under Main Menu, select
CONTRAST using the [+] or [ ] button, then press [Menu] button to activate the function.
Press the [+] button to increase contrast, [ ] button to decrease contrast shown below. Press
[Menu] to return to Main Menu.
AUTO–CONTRAST
[+] or [ ] button to select AUTO CONTRAST, then press [Menu] button to activate AUTO
CONTRAST.
VIDEO ANALOG/DIGITAL
[+] or [ ] button to select VIDEO ANALOG, then press [Menu] button to switch between video
signal type.
Note: The Digital input signal requires an optional 24-pin Digital signal cable to operate.
BRIGHTNESS
Adjusts the brightness level of the screen image. Under the Main Menu,
select BRIGHTNESS using [+] or [ ] button, then press [Menu] button to activate the function.
Press the [+] button to increase the brightness, [ ] button to decrease the brightness shown
below. Press [Menu] to return to main menu.
Automatically adjusts the contrast level of screen image. Press
Switches between analog and digital input signal. Press
8