Adjusting Monitor Settings
Use the OSD to easily adjust the screen image based on your viewing preferences.
Note:
You must perform Auto setup before making any adjustment.
Note:
For the best display performance, it is strongly recommended that you
use Auto setup to automatically configure your monitor's settings.
OSD Main Menu
To display the OSD Main Menu, press the Select button.
The following table briefly describes each of the items in the OSD Main Menu.
Item
Auto setup
Management
Clock/Phase
Color
OSD Display
Factory Recall
Language
Exit
Selecting Items in OSD
To select items in the OSD Main Menu, use the Up (△) or Down (▽) buttons on the
front panel of the monitor.
To select items in the OSD sub-menus, use all three, control buttons. Use the Up (△)
or Down (▽) buttons to move to a specific item, and accept the selection by
pressing the Select button.
Description
Automatically configure the monitor's settings. See "Auto setup"
on page 9.
Open the Management sub-menu where you can select
Brightness, Contrast or the image position for further
adjustment. See "Management Sub-menu" on page 10.
Open the Clock/Phase sub-menu where you can select Clock or
Phase for further adjustment. See "Clock/Phase Sub-menu" on
page 11.
Open the Color sub-menu where you can select Color Temp,
Black Level Adjust and RGB Adjust for further adjustment. See
"Color Sub-menu" on page 12.
Open the OSD Display sub-menu where you can select H.
Position or V. Position of the OSD display for further
adjustment. See "OSD Display sub-menu" on page 13.
Restore the factory default setting values. See "Factory Recall" on
page 13.
Open the Language sub-menu where you can select one of the
five languages for your preference in displaying the OSD
messages. See "
Sub-menu
Language
Clear and exit the OSD Main Menu. See "
OSD
Exiting
" on page 15.
" on page 14.
8