Table of Contents
Advertisement
OPERATING INSTRUCTIONS (cont.)
OSD (On Screen Display) SET UP
When the input source is in VGA, Composite video or S-Video mode, you can
adjust OSD as shown in the figure below:
OSD Setting
1.
Press " MENU" key to open OSD menu
2.
Press>or <key to select "OSD" Set up option
3. Press "MENU" key to Select submenu
·Language
1. Press>or <key to select "Language" option
2. Press "MENU" key to adjust language. There are four language to select:
English, Simplified Chinese.French, Spanish,
3. After adjustment, press "AUTO" key to exit.
·H-position
1.
Press>or <key to select "H-position" option
2.
Press "MENU" key to move the OSD to the right. To move the OSD to the
left, continue to push "Menu" key until it loops to the left of the display.
3.
After adjustment, press "AUTO" key to exit.
·V-position
1.
Press>or <key to select "V-position" option
2.
Press "MENU" key to move the OSD down. To move the OSD to the top,
continue to push "Menu" key until it loops to the top of the display.
3.
After adjustment, press "AUTO" key to exit.
·OSD Timer
1.
Press>or <key to select "OSD-Timer" option
2.
Press "MENU" key to Select submenu
3.
Press>or <key to select adjust OSD display time.
4.
After adjustment, press "AUTO" key to exit.
23
Advertisement
Table of Contents
