Table of Contents
Advertisement
OPERATING INSTRUCTIONS (cont.)
VGA Picture Setting
When the input source is in VGA (PC) mode, you can select Brightness,
Contrast, H/V Position, Clock, Phase, AUTO, Color, and Reset as shown in
the figure below:
VGA Picture Setting
1.
Press " MENU" key to open OSD menu
2.
Press>or <key to select "VGA" Picture Set up option
3. Press "MENU" key to Select submenu
·Brightness
1.
Press>or <key to select "Brightness" option
2.
Press "MENU" key to Select submenu
3.
Press>or <key to adjust brightness value.
4.
After adjustment, press "AUTO" key to exit.
·Contrast
1.
Press>or <key to select "Contrast" option
2.
Press "MENU" key to Select submenu
3.
Press>or <key to adjust contrast value.
4.
After adjustment, press "AUTO" key to exit.
·H-position
1.
Press>or <key to select "H-position" option
2.
Press "MENU" key to Select submenu
3.
Press>or <key to adjust H-position data.
4.
After adjustment, press "AUTO" key to exit.
17
Advertisement
Table of Contents
