Table of Contents
Advertisement
4. Connect the power supply and power interrupt cables (for the All-In-One power switch, if your
computer or docking station is so equipped) to the connectors on the bottom of the monitor.
See the following diagram for connector locations.
Notes:
If needed, connect an audio cable to the audio port on the monitor, and to the
headphone or audio line output connector on the computer.
If an external keyboard or other USB device will be used with the monitor, plug it into
either of the monitor's Type A USB connectors.
Two USB devices can be connected to the monitor.
The following figure shows typical connections.
LX1200TR User's Manual (020-0512-00A)
Page 9 of 20
Advertisement
Table of Contents
