Mechanical Characteristics; Cosmetic; Mechanical Data Files; Location Of Philips Logo - Philips 231P4UPES/00 Service Manual

5

Mechanical characteristics

5.1

Cosmetic -

Philips ID
5.2

Mechanical data files -

ProE files required
5.3

Location of Philips logo -

Per Philips make-up sheet
5.4

Gap between panel and front bezel

< 1.2mm (Typ.)
5.5

Location of Control icons -

Per Philips Graphic sheet
5.6

Color for resin/paint -

Per Philips make-up sheet
5.7

Fire enclosure request

Shielding Cover should fulfill international standard
5.8

Resins

RoHS required
WEEE required.
Resin type/selection refer to Project Book Section 7.2 Plastic material.
5.9

If paint is used

RoHS required
WEEE require
If new painting type need to implement, refer to UN-D 1235.

5.10 Plastic mold tooling

Tooling to be designed to minimize cosmetic defects induced by molding process (sink, blush,
weld lines, gate marks, ejector marks, etc.). Refer to "TYV61-90007".
Painting to cover up cosmetic defects due to molding is strongly discouraged.
China RoHS mark requested.

5.11 Plastics flammability

All Plastics to be Flame Retardant UL 94-HB or Better.
0.1
2012/08/09
231B4UC
PHILIPS
23" Wide 16:9 LCD Monitor
87 of 95