Mechanical Characteristics; Cosmetic; Mechanical Data Files; Location Of Philips Logo - Philips 241P3LES/00 Service Manual

5

Mechanical characteristics

5.1

Cosmetic -

Philips ID
5.2

Mechanical data files -

ProE files required
5.3

Location of Philips logo -

Per Philips make-up sheet
5.4

Gap between panel and front bezel

< 1.4(typ.) mm
5.5

Location of Control icons -

Per Philips Graphic sheet
5.6

Color for resin/paint -

Per Philips make-up sheet

Fire enclosure request-

5.7
Shielding Cover should fulfill international standard
5.8

Resins

RoHS required
WEEE required.
Resin type/selection refer to Project Book Section 7.2 Plastic material.
5.9

If paint is used

RoHS required
WEEE require
If new painting type need to implement, refer to UN-D 1235.
5.10

Plastic mold tooling

Tooling to be designed to minimize cosmetic defects induced by molding
process (sink, blush, weld lines, gate marks, ejector marks, etc.). Refer to
"TYV61-90007".
Painting to cover up cosmetic defects due to molding is strongly discouraged.
China RoHS mark requested.
2010/11/30
General Product Specification
241P3LY
PHILIPS
241P3L LCD
24" Wide FHD LCD Monitor
23 of 33
73