Table of Contents
Advertisement
F. Off
i. Purpose: No optimization by SmartImage.
ii. Design:
3.13.1.7
A. Purpose: Built-in demo mode for sales in-store demo.
B. Design:
i.
ii.
iii.
iv.
C. Hot keys to trigger:
Press [Smart Image] 3 seconds or more to trigger the demo mode.
When demo mode is On, press 3 seconds or more to turn off the demo mode.
When the demo mode is enabled, the white LED
3.17 PerfectTune
1.Per PerfectTune must be done after warming 30 minutes at least.
2.PerfectTune must be performed after Auto Color.
3.PerfectTune must be conducted through DVI or scaler embedded patterns.
4.Delta E < 10
3.14
3.18.1 Frequency Response
The amplifier and speaker combination shall provide a frequency response of
300 Hz to 20 kHz, with +/- 3 dB variation over the entire response range.
0.1
2012/08/09
1. This will follow user OSD setting. If any change by user, it will be saved.
When switch back from other SmartImage profiles, it will go back to last
saved setting.
2. Gamma Table is turn on to reduce bad color tracking.
Demo mode
Dynamically split screen to 2 vertical frames with one vertical white line. The line
width is 2 pixels. The left frame will be enhanced by SmartImage Lite and right
frame remains original performance.
There is OSD showing "SmartImage On / SmartImage Off" in
left frame and "Original Image" in right frame.
The OSD word color is white with transparent background.
The demo profile will be "Video Playback" profile with "High" ODC setting.
231B4UC
PHILIPS
23" Wide 16:9 LCD Monitor
79 of 95
Advertisement
Table of Contents
