Boot Up Numlock Status; Gate A20 Option; Typematic Rate Setting - MSI MS-6339 User Manual

CHAPTER 4

Boot Up NumLock Status

The default value is On.
On (default)
Off

Gate A20 Option

Normal
Fast(default)

Typematic Rate Setting

Key strokes repeat at a rate determined by the keyboard controller.
When enabled, the typematic rate and typematic delay can be selected.
The settings are Enabled and Disabled.
Typematic Rate (Chars/Sec)
Sets the number of times a second to repeat a key stroke when you
hold the key down. The settings are 6, 8, 10, 12, 15, 20, 24 and 30.
Typematic Delay (Msec)
Sets the delay time after the key is held down before it begins to
repeat the keystroke The settings are 250, 500, 750 and 1000.
Keypad is numeric keys.
Keypad is arrow keys.
The A20 signal is controlled by keyboard
controller or chipset hardware.
The A20 signal is controlled by port 92 or
chipset specific method.
4-10
AWARD BIOS SETUP
®