Other Care - Hitachi PJ1165 Service Manual

CP-X1200(P5XLA) / CP-X1250(P5XMLA) / CP-X1200WA(P5XMLB) / PJ1165(P5XMB)

6-7 Other care

• Please carefully read the "User's Manual - Safety Guide".
• Before caring, make sure the power switch is off and the power cable is not plugged in.
• Be cautious of high temperature. Do not touch about the lens and ventilation openings during use or immedi-
ately after use prevent a burn.
• Never try to care for the inside of the unit yourself. Doing so is dangerous.
• Incorrect care could have adverse influence such as discoloration, peeling paint, etc.
• Do not use cleaner or chemicals other than those listed below, including benzene and paint thinner.
• Do not use aerosols or sprays.
• Do not polish or wipe with hard objects.
Caring for the inside of the projector
In order to ensure the safe use of your projector, please have it cleaned and inspected by your local dealer about
once every 2 years.
Caring for the lens
1. Turn off the projector, and unplug the power cord.
2. Lightly wipe the lens with a commercially available lens-cleaning wipe. Do not touch the lens directly with your hand.
Caring for the cabinet and remote control
1. Turn off the projector, and unplug the power cord.
2. Wipe lightly with gauze or a soft cloth.
memo : If soiling is severe, dip soft cloth in water or a neutral cleaner dilute in water, and wipe lightly after
wringing well. Then, wipe lightly with a soft, dry cloth.
WARNING
CAUTION
24