Putting Batteries - Hitachi PJ1165 Service Manual

CP-X1200(P5XLA) / CP-X1250(P5XMLA) / CP-X1200WA(P5XMLB) / PJ1165(P5XMB)
6-2 Before replacing the LCD/Lens prism
You should not replace separately the parts of the liquid crystal LCD/Lens prism because it works properly only
when used together. Therefore, regarding these parts, you can either replace part, LCD/LENS PRISM assembly,
or send the whole unit LCD/LENS PRISM assembly back to HITACHI, where we will replace the malfunctioning
part, recondition the device and send it back to you.
DISTRIBUTOR

6-3 Putting batteries

• About the battery
• Keep a battery away from children and pets.
• Use only the battery specifi ed: two AA batteries.
• Do not mix new battery with used one.
• Make sure the plus and minus terminals are correctly aligned when loading the battery (as indicated in the
remote control).
• Dispose of batteries in accord with environmental laws.
1. Remove the battery cover.
Slide back and remove the battery cover in the direction of the arrow.
2. Insert the batteries.
Align and insert the two AA batteries according to their plus minus terminals
(as indicated in the remote control).
3. Close the battery cover.
Replace the battery cover in the direction of the arrow and snap it back into
place.
Do not disassemble the unit
because replacement of separate
parts is not possible.
Return
CAUTION
19
HITACHI
Replacement of G Panel
G Panel
Reconditioning