Advertisement
3.1.2 Removing the Main board (See Fig.3 to 5)
(1) Disconnect the connector wires from Jack board connect-
ed to connector CN301A,
Main board. (See Fig.3)
(2) Disconnect the Earth wire connected to post pin
the Main board. (See Fig.3)
(3) Disconnect the connector wire from AC adapter connected
to connector
CN307A
(4) Remove the two screws B attaching the Antenna terminal.
(See Fig.4)
(5) Remove the three screws C attaching the Main board. (See
Fig.5)
3.1.3 Removing the AC adapter (See Fig.6)
(1) Remove the two screws D attaching the AC adapter.
3.1.4 Removing the Jack board (See Fig.6)
(1) Remove the one screw E attaching the Jack board.
3.1.5 Removing the LCD board (See Fig.7)
(1) Remove the seven screws F attaching the LCD board.
1-8 (No.MB675<Rev.002>)
CN302A
and
CN306A
WP304
of the Main board. (See Fig.3)
of the
of
CN302A
WP304
CN301A CN306A CN307A
Fig.3
B
Fig.4
C
Fig.5
E
D
Fig.6
F
Fig.7
Advertisement
