Kia Rio 2006 Owner's Manual page 69

Knowing Your Vehicle
Chid restraint hook holder
Tether anchor installation
Your vehicle is equipped with an anchor for secur-
ing the tether strap of a child restraint system (child
seat). The child restraint anchor fittings are
installed on the floor behind the rear seat.
WARNING
If the tether strap is clipped incorrectly, the
child restraint seat may not be restrained
properly in the event of a collision.
3-58
Installing a child restraint seat ;
Tether anchor
cover
1. Position the child restraint seat on the rear
2. Route the child restraint seat tether strap over
Tether
strap
hook
3. Locate the correct anchor on the floor behind
S2BLD348
4. Open the tether anchor cover.
5. Clip the tether strap hook to the tether strap
6. Tighten the tether strap to secure the seat.
passenger seat cushion.
the back of the seat.
For vehicles with adjustable head restraints,
route the tether strap under the head restraint
and between the head restraint posts, otherwise
route the tether strap over the top of the seat-
back.
the rear seat for the selected seating position.
hook holder.