Kia Rio 2006 Owner's Manual page 59

Knowing Your Vehicle
(B)
(D)
To unfasten the rear center belt
1. Press the release button on the buckle (D) and
remove the tongue plate (B) from the buckle (D).
2. Type A : Press the release button on the buckle
(C) and remove the tongue plate (A)
from the buckle (C). The belt webbing
will retract automatically.
Type B : To retract the rear center seatbelt,
insert the key or similar small rigid
device into the web release button (E)
on the anchor connector. Pull up on
the seat belt web (A) and allow the
webbing to retract automatically.
3-48
Type A
(B)
(A)
(A)
(C)
(D)
(C)
Type B
(A)
(C)
(E)
S2BLC304A/E6BLA390/E6BLA391
Proper Use and Care of the Safety Belt
System
To ensure that the safety belts provide the maxi-
mum protection, please follow these instructions:
• Use the belts at all times - even on short trips.
• If the safety belt is twisted, straighten it prior to
use.
• Keep sharp edges and damaging objects away
from the belt.
• Periodically inspect belt webbing, anchors, buck-
les, and all other parts for signs of wear, and
damage. Replace damaged, excessively worn or
questionable parts immediately.
• To clean the belt webbing, use a mild soap solu-
tion recommended for cleaning upholstery or
carpets. Follow the instructions provided with the
soap. Do not bleach or dye the webbing because
this may weaken the webbing fibers and allow
them to fail when loaded in a collision.
• Do not make modifications or additions to the
safety belt.
• After wearing a safety belt, make sure it fully
retracts to the stowed position. Do not allow the
belt to get caught in the door when you close it.