Kia Rio 2006 Owner's Manual page 55

Knowing Your Vehicle
5. Adjust the shoulder anchor position to your size.
To raise the anchor position, pull the lever and
push the anchor up. To lower the anchor posi-
tion, pull the lever and slide the anchor down.
After adjustment, make sure the anchor is
locked in position.
3-44
If the height of the adjusting seat belt is too near
your neck, you will not be getting the most effective
protection. The shoulder portion should be
adjusted so that it lies across your chest and
midway over your shoulder nearest the door and
not your neck.
WARNING
• The height adjuster must be in the
locked position when the vehicle is
moving.
• The misadjustment of height of the
S2BLD320
shoulder belt could reduce the effective-
ness of the seat belt in a crash.