Camera Registration; Camera Installation - Samsung SMARTCAM A1 User Manual

Camera registration

pairing
Set the station hub and camera in close range of each other. (about
1.
30cm~100cm)
Press and hold the [pair] button on the camera for 3 seconds, and press
2.
and hold the [pair] button on the station hub for 3 seconds.
When pairing is complete, the following indicators will be displayed: Blue ON
3.
(station hub) Green ON (station camera), Green turns on for 5 seconds and
then turns off (outdoor battery camera)
Repeat steps 1 through 3 to pair an additional station hub and camera.
`
n
Before pairing, dock the station camera on the station hub to charge it sufficiently.
`
OFF ON
PAIR
PAIR
3 sec
Wi-Fi
PAIR
NETWORK
PAIR
POWER
3 sec
12 · English

Camera installation

Station camera
Dock it on the station hub or place it on a shelf or a flat
place.
When the camera is docked on the station hub,
PAIR the camera battery will start to be charged. Pan
3 sec
(move left/right) and auto tracking are available.
n
PAIR
3 sec
Wi-Fi
PAIR
NETWORK
POWER
When you remove the camera from the
`
station hub, the camera (with the battery
fully charged) can operate for 2 to 3 hours.