Amplifier Dsp; Amplifier Dsp Controls - Electro-Voice EKX-15P User Manual

6

Amplifier DSP

6.1

Amplifier DSP controls

The amplifier has a combination of controls and connectors to ensure the most versatile
loudspeaker system.
Full-Range loudspeaker control and monitoring interface
The full-range loudspeaker DSP control menu selections are available for the EKX-12P and
EKX-15P.
Figure 6.1: Full-Range loudspeaker amplifier panel
1.
2.
3.
4.
5.
6.
7.
Electro-Voice
LCD – DSP control and monitoring interface.
MASTER VOL – Adjusts the sound level.
DSP – Scroll through the menu and select the available choices. Push the MASTER VOL
knob to enter the DSP menu.
INPUT LEVEL – Level control for adjusting the individual inputs' level. The 12 o'clock
position is unity gain (no gain or attenuation), the range to the left of zero (0) is for
adjusting line level sources, and the range to the right of zero (0) is for adjusting
microphone levels. LINE and MIC input level control is available for both INPUT 1 and
INPUT 2.
INPUT – Balanced input for the connection of signal sources like mixing consoles,
instruments, or microphones. Connections can be established using ¼ inch TRS or XLR
connectors.
POWER – AC switch or switching the power ON or OFF. The LCD screen lights up when
the power is turned ON.
MAINS IN – AC connection is established via an IEC-connector.
OUTPUT – XLR output sends the mix of both input signals to another loudspeaker or
subwoofer. INPUT LEVEL controls the signal level to OUTPUT. The MASTER VOL or DSP
control settings do not affect OUTPUT.
User Manual
en 19
2015.01 | 01 | F.01U.308.095