Channel Level - Pioneer Elite VSX-24TX Operating Instructions Manual

Channel Level

The following steps show you how to balance the sound output level of your speakers. Proper speaker balance is
essential for obtaining high quality surround sound. If continuing from CHANNEL DELAY go to step 1. If starting fresh,
complete steps 1-3 in "Setting Up for Surround Sound" (p.24) first.
Î
S0URCE RECEIVER
MULTI SYSTEM
OPERATION OFF
DVD/LD TV/SAT VCR1 VCR2
MULTI CONTROL
MD/
CD TUNER TVCONT
TAPE1
CLASS MPX BAND DIRECT ACCESS
7 3 8
¶
- + - +
TUNING STATION
1 ¡ 4 ¢
-
+
DTV ON/OFF DTV MENU CHANNEL
2 3
1
5 6
4
7 8 9
GUIDE
EXIT
0
ENTER
DISC
+10
TV
TV VOL TV CONTROL VOLUME
TV FUNC
EFFECT
MENU MUTE
/CH SEL
FUNCTION
ENTER
SIGNAL
SELECT
/dts
SYSTEM
THX ADVANCED
STANDARD
SETUP
REMOTE
MIDNIGHT DSP STEREO
SETUP
DIGITAL NR
DIGITAL MULTI PROCESSING AMPLIFIER
REMOTE CONTROL UNIT
1
Select CHANNEL LEVEL (if continuing from
CHANNEL DELAY, it will already be selected).
See "Setting Up for Surround Sound" on page 24 if you are
unsure how to do this.
Press ENTER.
2
Select aTEST TONE mode.
1 Press 2 or 3 to move the hand to AUTO or MANU.
2 Press ∞ button to select SETTING START.
AUTO (automatic TEST TONE)
1,2
This mode switches the test tone between each speaker
automatically. Use this mode when balancing the speaker levels
by ear.
The automatic test tone is output in the following order :
MANUAL (manual TEST TONE)
This mode lets you switch the test tone between each speaker
manually. You can use this mode when you want to balance the
speaker levels by ear at a more leisurely pace.
Surround Sound Set Up
Channel Level
Test Tone [ AUTO ]
[Setting Start ]
[EXIT]
FL CT
SL
SW
FR
SR
29