The System Setup Menu; Making Receiver Settings From The System; Channel Level - Pioneer SX-316-S Operating Instructions Manual

The System Setup menu

Chapter 5:
The System Setup menu
Making receiver settings from
the System Setup menu
The following section shows you how to make
detailed settings to specify how you're using
the receiver and also explains how to fine-tune
individual speaker system settings to your
liking.
RECEIVER
SLEEP
INPUT SELECTOR
DVD TV
F.AUDIO
CD CD-R
STANDARD ADV.SURR STEREO
TOP MENU
SETUP
TUNER EDIT
S.RETRIEVER
VOLUME
1 Press RECEIVER on the remote control,
then press the SETUP button.
2 Use (cursor up/down) to select the
setting you want to adjust then press ENTER .
• SP SETUP allows you to specify the
distance and balance of the speakers
you've connected:
CH LEVEL — Adjust overall balance of
your speaker system.
SP DISTN. — Specify the distance of your
speakers from the listening position.
Note
1 This setting works only with dual mono encoded Dolby Digital and DTS soundtracks.
2 After the volume increases to the reference level, test tones will be output.
DIMMER ANALOG ATT
DVR
RECEIVER
FM AM
MIDNIGHT/
LOUDNESS
MENU
DIALOG E
ENTER
ONE
TOUCH
COPY
RETURN
• OTHER allows you to make customized
settings to reflect how you are using the
receiver.
DRC – This setting specifies the amount of
dynamic range adjustment to Dolby Digital
and DTS movie soundtracks (use this when
listening to surround sound at low
volumes).
1
DUALMONO – You can specify how dual
mono encoded Dolby Digital soundtracks
should be played (dual mono is sometimes
used when two languages need to be sent
to separate channels).
LFE ATT – Some Dolby Digital and DTS
audio sources include ultra-low bass
tones. Set the LFE attenuator as necessary
to prevent the ultra-low bass tones from
distorting the sound from the speakers.

Channel level

Default setting:0dB (all channels)
1 Select CH LEVEL from the SP SETUP menu.
2 Use (cursor left/right) to select a
setup option.
• T. TONE M.– Move the test tone manually
from speaker to speaker and adjust
individual channel levels.
• T. TONE A. – Adjust channel levels as the
test tone moves from speaker to speaker
automatically.
3 Confirm your selected setup option.
2
will start after you press ENTER.
The test tones
05
23
En