Before You Start; Checking The Supplied Accessories; How To Use This Manual; Preparing The Remote Control - Pioneer Elite VSX-24TX Operating Instructions Manual

Before You Start

Checking the Supplied Accessories

Please check that you have received all of the following supplied accessories.
FM wire antenna

How to Use This Manual

This manual is for the VSX-27TX/26TX/24TX Audio/Video
Multi-Channel Receiver.
This manual is divided into three main sections which
will tell you how to setup and use the unit :
PREPARATION
First carry out the tasks below in this "Before You Start"
section to prepare the remote control, then connect the
receiver to your other components as described in
"Connecting Your Equipment" (p.8). Take special care to
connect your digital equipment like DVDs and LDs
properly to be able to take advantage of the receiver's
surround sound systems (p.10-11). To learn about a
specific button, control, or indicator, see "Displays &
Controls" starting on p.17.
SET UP
Performing the tasks in "Surround Sound Set Up" (from
p.24) is essential to get proper surround sound.

Preparing the Remote Control

Loading the batteries
Load the batteries into the remote control as shown below. Please use alkaline batteries.
1
When you notice a decrease in the operating range of the remote control, replace all batteries with new ones.
CAUTION!
Incorrect use of batteries may result in such hazards as leakage and bursting. Observe the following precautions.
• Never use new and old batteries together.
• Insert the plus and minus sides of the batteries properly according to the marks in the battery case.
• Batteries with the same shape may have different voltages. Do not use different batteries together.
6
AM loop antenna
"AA" IEC LR6 batteries x 2
2
\
OPERATION
To play some music or soundtrack refer to "Basic
Playback" on p.35. "Using the Tuner" (p.44) explains
how to use the radio of this unit. Doing the operations in
"Remote Control of Other Components" (p.48) is highly
recommended so you can use this unit's remote control
for all your components. "Using Other Functions" (p.60)
explain the other possibilities of the receiver.
"Techno Tidbits & Problem-solving" (p.72) provide
detailed technical information and a troubleshooting
guide.
The following marks and symbols are used throughout
the manual:
Provides additional information, precautions,
memo
and advice.
Indicates a blinking button, indicator, or
display.
Indicates a steadily lit button, indicator, or
display.
3
\
Remote control unit