Installing The Driver For The Intel Ethernet Card; Installing The Driver For Usb 3.0; Installing Drivers For Hyper-V Operating Systems; Installing The Driver For The Chipset - Lenovo ThinkServer TS150 Operating System Installation Manual

5. In the installation options window, select the option of your choice and then click Next .
6. In the NVIDA installer has finished window, click Close to finish the installation. It is recommended to
restart your server after the installation is completed.

Installing the driver for the Intel Ethernet card

To install the driver for an Ethernet card, do the following:
1. Download the driver for the Ethernet card or a CNA card from the Lenovo Web site to your server. If the
driver is a compressed file, unzip it to a folder. The most up-to-date device drivers for various server
models are always available on the Lenovo Web site at:
http://www.lenovo.com/drivers
2. Copy the driver for the Ethernet card to a USB storage device. Connect the USB storage device to
your server.
3. Open the folder that contains the driver and double-click the Setup file.
Note: If Windows 10 is installed, click Yes in the window.
4. In the Intel Network Connections window, select Install Drivers and Software.
5. In the Welcome to the install wizard for Intel Network Connections window, click Next.
6. In the License Agreement window, select I agree the terms in the license agreement. Then click Next.
7. In the Setup Options window, click Next.
8. In the Ready to Install the Program window, click Install to begin the installation.
9. In the Install wizard Completed window, click Finish. It is recommended to restart your server after
the installation is completed.

Installing the driver for USB 3.0

For the Windows operating system, the driver for USB 3.0 is installed during the operating system installation.

Installing drivers for Hyper-V operating systems

This topic provides instructions on installing the following drivers for Hyper-V operating systems:
• "Installing the driver for the chipset" on page 48
• "Installing drivers for an onboard graphics card" on page 49
• "Installing the driver for the Intel Ethernet card" on page 49

Installing the driver for the chipset

To install the driver for the chipset, do the following:
1. Download the driver for the chipset from the Lenovo Web site. If the driver is a compressed file, unzip it
to a folder. The most up-to-date device drivers for various server models are always available for
download on the Lenovo Web site at:
http://www.lenovo.com/drivers
2. Copy the folder that contains the driver to your USB storage device and connect the USB storage
device to your server.
3. Enter the driver directory by using the command prompt to start the setup program.
4. In the Welcome to the Setup Program window, click Next.
5. In the License Agreement window, click Accept.
6. The Readme File Information window, click Install.
48
ThinkServer TS150 Operating System Installation Guide