Installing The Microsoft Windows 10 Professional Operating System - Lenovo ThinkServer TS150 Operating System Installation Manual

Hide thumbs Also See for ThinkServer TS150:
Table of Contents

Advertisement

3. When the Windows Server 2012 window is displayed, configure the language and other options you
need, and then click Next.
4. Click Install now.
5. Type your product key and then click Next. The product key information is available on the Microsoft
Certificate of Authenticity label or product packaging.
6. Read the license terms and click I accept the license terms. Then click Next.
7. Select the type of installation you need. The following steps are based on the scenario that Custom:
Install Windows only (Advanced) is selected in this step.
8. In the "Where do you want to install Windows?" window, depending on the SATA configuration on
your server, do one of the following:
• If your SATA configuration is set as RAID (both OB SATA RAID and ADD on RAID): do the following:
a. Connect the USB storage device that contains the driver to your server and click Load Driver.
b. Click Browse to locate the required driver and then click OK.
c. In the "Select the driver to be installed" window, select Hide drivers that are not compatible
with hardware on this computer. Select the driver that you want to install, and then click Next
to install the driver.
• If your SATA configuration is set as AHCI: go to step 9.
9. In the "Where do you want to install Windows?" window, click Drive options (advanced). Then click
New.
10. Type the amount of space (in MB), and then click Apply.
11. In the Windows Setup window, click OK.
12. Ensure that the drive partition is correct, and then click Next. The installation begins.
Notes:
• Your server will restart several times during the installation.
13. When the Settings window is displayed, click Next.
14. In the Windows Update window, click Next. Then, set an administrator password and click Finish.
Note: The password must be a combination of upper case letters, lower case letters, and numbers.
15. When the message MultiPoint Server Configuration Error is displayed, press any key. Follow the
instructions on the screen to sign in when prompted.
16. Type the user name and password, and press Enter. The user name will be configured as "administrator"
after your server restarts.

Installing the Microsoft Windows 10 Professional operating system

This topic provides instructions on how to install the Microsoft Windows 10 Professional (x64) operating
system.
To install the Microsoft Windows 10 Professional (x64) operating system, do the following:
1. Insert the operating system installation disc into the optical drive that you have set as the first startup
device, and start the server from the optical drive.
2. If the message Press any key to boot from cd is displayed, press any key. If the message Windows Setup
[EMS Enabled] is displayed, press Enter.
3. In the Windows window, select the language and other options. Then click Next.
4. Click Install now.
8
ThinkServer TS150 Operating System Installation Guide

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents