Installing The Driver For An Onboard Graphics Card; Installing The Driver For An Ethernet Card; Installing The Driver For The Intel Management Engine Interface - Lenovo ThinkServer RS140 Installation Manual

Installing the driver for an onboard graphics card

To install the driver for an onboard graphics card, do the following:
1. Download the driver from the Lenovo Web site. If the driver is a compressed file, unzip it to a folder. The
most up-to-date device drivers for various server models are always available for download on the
Lenovo Web site at:
http://www.lenovo.com/drivers
2. Copy the driver to a USB storage device. Connect the USB storage device to your server.
3. Use the Pnputil-i-a <driverinf> command to install the driver, for example:
e:
cd VGA
Pnputil –i –a *.inf
Note: In the command lines, e: represents the drive letter of your USB storage device and Video
represents the name of the folder where the driver is stored.
4. In the Windows Security window, click Install.
5. Restart your server after the installation is completed.

Installing the driver for an Ethernet card

To install the driver for an Ethernet card, do the following:
1. Download the driver for the Ethernet card from the Lenovo Web site to your server. The most up-to-date
device drivers for various server models are always available on the Lenovo Web site at:
http://www.lenovo.com/drivers
2. Copy the driver for the Ethernet card to a USB storage device. Connect the USB storage device to your
server.
3. Use the Pnputil-i-a <driverinf> command to install the driver, for example:
e:
cd / win2012_hyperv_NIC
Pnputil –i –a *.inf
Note: In the command lines, e: represents the drive letter of your USB storage device and win2012_
hyperv_NIC represents the subdirectory where the driver is located.
4. Restart your server after the installation is completed.

Installing the driver for the Intel Management Engine Interface

To install the driver for the Intel Management Engine Interface, do the following:
1. Download the driver from the Lenovo Web site. The most up-to-date device drivers for various server
models are always available for download on the Lenovo Web site at:
http://www.lenovo.com/drivers
2. Copy the driver for the chipset to a USB storage device. Connect the USB storage device to your server.
3. Use the Pnputil-i-a <driverinf> command to install the driver, for example:
e:
cd Managment
Pnputil –i –a *.inf
Note: In the command lines, e: represents the drive letter of your USB storage device and Managment
represents the subdirectory where your driver is located.
4. Restart your server after the installation is completed.
62
ThinkServer RS140 Operating System Installation Guide