Yamaha RX-V2065 Service Manual page 22

RX-V2065/HTR-6295
● Required Tools
• USB storage device
• Firmware RX-V2065 : RX-V2065_xxxx.bin
HTR-6295 : HTR-6295_xxxx.bin
● Preparation
1. Download the latest firmware from the specified download source to the folder of the PC.
2. Copy the latest firmware from the PC to the root folder of the USB storage device.
Note) When the firmware is copied to a sub-folder of the USB storage device, the update will not proceed.
● Operation procedures
1. Insert the USB storage device to the USB terminal located on the front panel of this unit. (Fig. 2)
2. While pressing the "TONE CONTROL" key of this unit, connect the power cable to the AC outlet. (Fig. 2)
Writing of the firmware is started and the screen is displayed as shown below. (Fig. 3).
"TONE CONTROL" key
Writing is started.
F I L E R E A D I N G
D S P x x x %
22
Writing method using the USB
USB terminal
Fig. 2
Writing being executed.
F L A S H E R A S I N G
Fig. 3
M A I N x x x % S U B B L K : 1 x x x %
Writing is completed.
U P D A T E S U C C E S S