JVC MX-SK1 Service Manual page 28

3.4.5 Removing the capstan motor
(See Fig. 11)
(1) Remove the two screws 3 from the capstan motor, and
then remove the joint bracket.
3.4.6 Removing the flywheel
(See Fig. 12, Fig. 13)
(1) Remove the head amplifier & mechanism control board.
(2) Remove the capstan motor assembly.
(3) After turning over the cassette mechanism, remove the two
slit washers and fixing capstan shaft L and R, and pull out
the flywheel (R) and (L) respectively from behind the
cassette mechanism.
3.4.7 Removing the reel pulse board and solenoid
(See Fig. 14)
(1) Remove the five pawls d to h retaining the reel pulse board.
(2) From the surface of the reel pulse board parts, remove the
two pawls i and j retaining the solenoid.
Solenoid
1-28 (No.MB207)
Flywheel R
Flywheel R
Capstan
shaft R
b
Slit washer
h d e f
Solenoid
Fig.14
3
Capstan motor
Joint
bracket
3
Fig.11
Flywheel L
Fig.12
Flywheel L
Capstan
shaft L
c
Slit washer
Fig.13
g
Reel pulse
board