JVC MX-SK1 Service Manual page 15

3.1.11 Removing the power transformer assembly
(See Fig.30~32)
• Prior to performing the following procedure, remove the metal
cover, and the CD changer unit, the rear panel, the speaker
board.
(1) Disconnect the wire from connector
transformer board.
(2) Remove the screw A' attaching the power transformer
board on the left side of the body.
(3) Remove the four screws B' attaching the power transform-
er board.
(4) Push the cord stopper upward and remove.
(5) Disconnect the power cord from connector
power transformer board and remove the band.
(6) Remove the power transformer assembly upward.
CN21 on the power
CN250 on the
CN214
Power transfomer board
B'
Power transfomer assembly
Fig.30
Power transfomer board
Fig.31
Power cord stopper
CN250
Power cord stopper
Fig.32
CN250
B'
CN214
A'
Power cord
(No.MB207)1-15