JVC MX-SK1 Service Manual page 10

3.1.6 Removing the front panel assembly
(See Fig.14~16)
• Prior to performing the following procedure, remove the metal
cover and the CD changer unit.
(1) Disconnect the card wire from the connector CN315,
CN316 and CN870 on the main board.
(2) Disconnect the wire from connector
board and remove the band attaching the wire to the main
board.
(3) Disconnect the wire from the connector
transformer board.
(4) Remove the two screws G attaching the front panel as-
sembly on the bottom of the body.
(5) Remove the two joints d and e on the lower part of the
sides using a screwdriver, and remove the front panel as-
sembly toward the front.
1-10 (No.MB207)
CN702 on the speaker
CN214 on power
Front panel assembly
Main board
CN870
Band
d
Fig.14
Power transformer board
CN214
Fig.15
Front panel assembly
Fig.16
CN316
CN315
Speaker board
CN702
Front panel assembly
e
G