PHONO/LINE Setup
The PHONO/LINE setup allows you to decide whether you'll hook up a turntable or a line level component (most
components, like CD players and DVD players, are line level).
3-6 2
3
4
Fine Tuning Your System
1 Turn on the receiver and your TV,
press RECEIVER on the remote con-
trol.
2 Press the SYSTEM SETUP button.
3 Looking at the on-screen display on
your TV, use the buttons to select
PHONO/LINE SETUP. Press the ENTER
button.
4 Use the buttons to select the
PHONO or LINE. Press ENTER.
PHONO: Use this setting for turntables (without a built-in
equalizer or pre-amplifier).
LINE: Use this setting for all audio components other
than a turntable and for turntables with a built-in phono
equalizer.
5 EXIT should be selected (if not, use
the buttons to select it). Press
ENTER.
6 Use the buttons to select EXIT
and press ENTER, again.
This exits the SYSTEM SETUP mode and returns to
normal operation.
Memo:
The default is PHONO.
95
En