Pioneer VSX-517-S/-K Operating Instructions Manual page 27

Controls and displays
RETURN
Press to confirm and exit the current menu
(also use to return to the previous menu
with DVDs or to select closed captioning
with DTV).
6 (TUNE/ST +/–) /ENTER
Use the arrow buttons when setting up your
surround sound system (see page 39). Also
used to control DVD menus/options and for
deck 1 of a double cassette deck player. Use the
TUNE +/– buttons to find radio frequencies and
use ST +/– to find preset stations (page 47). Use
the (SHIFT+) CH +/– buttons to select channels.
7 Component control buttons
The main buttons ( ,
control a component after you have selected it
using the MULTI CONTROL buttons.
The controls above these buttons can be
accessed after you have selected the
corresponding MULTI CONTROL button (for
example DVD/LD, DVR/VCR or TV/SAT (when
connected to a DTV)).
SUBTITLE*
Displays/changes the subtitles included in
multilingual DVD-Video discs.
REC*
Start recording.
AUDIO*
Changes the audio language or channel on
DVD discs.
HDD/DVD*
These buttons switch between the hard
disk and DVD controls for DVD/HDD
recorders.
REC STOP*
Stops recording.
, etc.) are used to
8 Number buttons/other component and
receiver controls
Use the number buttons to directly select a
radio frequency (page 47) or the tracks on a
CD, DVD, etc. There are other buttons that can
be accessed after the RECEIVER is pressed
(For example, MIDNIGHT, etc),
DISC (ENTER) can be used to enter
commands for TV or DTV, and can also be
used to select a disc in a multi-CD player.
TUNER DISP*
Switches between named station presets
and radio frequencies (page 48).
CLASS*
Switches between the three banks
(classes) of radio station presets
(page 47).
MPX*
Switches between stereo and mono
reception of FM broadcasts. If the signal is
weak then switching to mono will improve
the sound quality (page 47).
D. ACCESS*
After pressing, you can access a radio
station directly using the number buttons
(page 47).
MIDNIGHT
Switches to Midnight or Loudness
listening (page 37).
ANALOG ATT
Attenuates (lowers) the level of an analog
input signal to prevent distortion.
DIMMER
Dims or brightens the display.
SLEEP
Press to change the amount of time before
the receiver switches into standby (30 min
– 60 min – 90 min – Off). You can check
the remaining sleep time at any time by
pressing SLEEP once.
04
27
En