Connecting To The Front Panel Video Terminal; Connecting To The Front Panel Audio Mini; Jack - Pioneer VSX-517-S/-K Operating Instructions Manual

Connecting up
Important
• If you connect any source component to
the receiver using a component video
input, you must also have your TV
connected to this receiver's COMPONENT
VIDEO MONITOR OUT jacks.
1 Connect the component video outputs of
your source to a set of component video
inputs on this receiver.
Use a three-way component video cable.
2 If necessary, assign the component video
inputs to the input source you've connected.
This only needs to be done if you didn't connect
according to the following defaults:
• COMP 1 – DVD
• COMP 2 – TV
• COMP 3 – DVR
See Assigning the component video inputs on
page 45.
3 Connect the COMPONENT VIDEO
MONITOR OUT jacks on this receiver to the
component video inputs on your TV or
monitor.
Use a three-way component video cable.
Connecting to the front panel video
terminal
VSX-817 model only
Front video connections are accessed via the
front panel using the VIDEO button. Press
VIDEO and select VIDEO input. There are
standard audio/video jacks. Hook them up the
same way you made the rear panel
connections.
• Push down on the PUSH OPEN tab to
access the front audio/video connection.
VIDEO L AUDIO R
FRONT AUDIO CD CD-R / TAPE / MD FM
VIDEO L AUDIO R
V L R
VIDEO OUTPUT
Connecting to the front panel audio
mini jack
VSX-817 model only
Front audio connections are accessed via the
front panel using the FRONT AUDIO botton.
Press FRONT AUDIO and select F.AUDIO
input. Use a stereo mini-jack cable to connect
a digital audio player.
• Push down on the PUSH OPEN tab to
access the front audio/video connection.
FRONT AUDIO CD
VIDEO
Portable CD player (etc.)
MCACC/
AUDIO IN
AM AUX
MCACC/
AUDIO IN
Video
camera
(etc.)
MCACC/
VIDEO L AUDIO R AUDIO IN
CD-R / TAPE / MD FM AM AUX
MCACC/
L AUDIO R AUDIO IN
AUDIO OUT
03
17
En