Connecting Your Equipment; Rear Panel - Pioneer VSX-1016TXV-K Operating Instructions Manual

Connecting your equipment

Chapter 3
Connecting your equipment
This receiver provides you with many connection possibilities, but it doesn't have to be difficult. This page explains the
kinds of components you can connect to make up your home theater system.

Rear panel

P
Caution
• Before making or changing the connections, switch
off the power and disconnect the power cord from the
power outlet. Plugging in should be the final step.
1 HDMI connectors (x3)
Two inputs and one output for high-quality audio/video
connection to compatible HDMI devices.
Connecting using HDMI on page 41.
2 XM Radio input
See Using XM Radio on page 40.
3 Coaxial digital audio inputs (x2)
Use for digital audio sources, including DVD players/
recorders, digital satellite receivers, CD players, etc.
See also The Input Assign menu on page 46 to assign
the inputs.
4 Optical digital audio output / input(s) (x4)
Use the OUT jack for recording to a CD or MiniDisc
recorder.
Connecting digital audio sources on page 15.
Use the IN jacks for digital audio sources, including DVD
players/recorders, digital satellite receivers, CD players,
etc.
See also The Input Assign menu on page 46 to assign
the inputs.
PRE OUT
CENTE CENTER
L
P
IN OUT IN OUT IN
DVR/VCR1 DVR/VCR2
L
R R
RROUND D
CK CK
1 1 1 3 1
A
5 Control input/output
Use to connect other Pioneer components so that you
can control all your equipment from a single IR remote
sensor.
Operating other Pioneer components with this unit's
sensor on page 56.
6 Stereo analog audio source inputs/(outputs) (x3)
Use for connection to audio sources such as CD players,
tape decks, turntables, etc.
Connecting analog audio sources on page 16.
7 Component video connections (x4)
Use the inputs to connect any video source that has
component video output, such as a DVD recorder. Use
the output for connection to a monitor or TV.
Using the component video jacks on page 14.
8 Audio/video source inputs/(outputs) (x6)
Use for connection to audio/visual sources, such as DVD
players/recorders, VCRs, etc. Each set of inputs has jacks
for composite video, S-video and stereo analog audio.
Connecting a DVD/HDD recorder, VCR and other video
sources on page 14.
9 AM and FM antenna terminals
Use to connect indoor or outdoor antennas for radio
broadcasts.
Connecting antennas on page 19.
03
1 1 4 1
OUTLET
SWITCHED 100 W(0.8 A) MAX
11
En