Technics SU-G700 Owner's Manual page 23

Analog audio cable (not supplied)
Do not input the audio signal from PRE
OUT/LINE OUT terminals to the analog
audio input terminals of this unit. Doing so
may cause malfunction.
Using analog audio input device
You can connect the CD recorder, etc. with analog
audio cable (not supplied) to output analog audio
signals from this unit (LINE1/LINE2/PHONO).
Using analog audio cable
1 Disconnect the AC power supply cord.
2 Connect this unit and a CD recorder,
etc.
3 Connect the AC power supply cord to
this unit. ( 15)
4 Press [AMP
Note
• When a digital audio signal (COAX1/COAX2/
OPT1/OPT2/PC) is selected as input source of
this unit, analog audio signal (LINE1) is output.
• The choppy audio occurs in output audio signal
when switching the input source.
CD recorder, etc.
] to turn this unit on.
Operations
23
(23)