Using The Remote Control; Display - Pioneer A9 SX-A9MK2-K Operating Instructions Manual

03 Controls and displays

Using the remote control

Keep in mind the following when using the
remote control:
• Make sure that there are no obstacles
between the remote and the remote sensor
on the unit.
• The remote has a range of about 7 m (23 ft.)
at an angle of about 30º from the remote
sensor.
• Remote operation may become unreliable
if strong sunlight or fluorescent light is
shining on the unit's remote sensor.
• Remote controllers for different devices
can interfere with each other. Avoid using
remotes for other equipment located close
to this unit.
• Replace the batteries when you notice a fall
off in the operating range of the remote.
14
En

Display

1 2 3
TUNED TUNED TREBLE TREBLE
STEREO STEREO BASS BASS
MONO MONO
XM XM
FM FM
AM AM
5 6
1 Tuner Indicators
TUNED – Lights when a broadcast is being
received.
STEREO – Lights when a stereo FM
broadcast is being received in auto stereo
mode.
MONO – Lights when the MPX button is
used to select mono mode.
2 Tone control indicators
TREBLE – Lights when high-range tone
adjustment is applied.
BASS – Lights when low-range tone
adjustment is applied.
3 Sound Retriever indicator
Lights when the Sound Retriever function is
enabled.
4 Master volume level
5 FM – Lights when FM broadcasts are
received.
AM – Lights when AM broadcasts are
received.
XM – Lights when XM radio broadcasts are
6
received.
7 Character display
Displays various system information.
8 MHz – Lights when an FM frequency is
displayed.
KHz – Lights when an AM frequency is
displayed.
4
dB dB
MHz MHz
KHz KHz
7 8