Table of Contents
Advertisement
Menu
[Depth
Accuracy]
[Alert]
[Time Adjust]
[I/O]
[Network]
[LCD Reset]
[TEST]
[DEMO]
[Service Reset]
[Exit]
3.2
How to Set the Time
On the [Menu] window, select [System] → [Ship's Time] to set the time.
Select [External] to use time data from equipment
that outputs time in ZDA format.
• [Time]: Select the source of time, [UTC] or [Local].
Select the method for measuring depth, [Normal] or [High]. [High] pro-
vides depth with higher resolution.
[Alert Mode Select]: Select the alert mode among [Legacy], [Alert I/
F1] and [Alert I/F 2]. If IF-2503 is connected to FE-800, select [Lega-
cy].
• [Legacy]: Use IIalr and IIals sentences.
• [Alert I/F 1]: Use ALR and ACK sentences.
• [Alert I/F 2]: Use ALF and ACM sentences.
[Buzzer]: Set [ON] to sound the alarm against alarms other than the
depth alarm.
Select the source for time, internal clock or external equipment.
[EXT EQUIP]: Select the source of position data, among [DE], [GA],
[GL], [GN], [GP], [II], [IN], [LA], [LC] or [ALL] (default setting: [GP]).
Note: [ALL], which selects the source in priority order, does not com-
ply with IEC standards.
[Port1], [Port4]: Set the IEC standard to use for input and output sig-
nals. See section 3.4.
[Port Monitor]: Show the port monitor.
[Ethernet]: Set up the Ethernet. See section 3.5.
[IP ADD]: Set the [IP address], [Subnet Mask] and [Default Gateway].
[SFI]: Set the System function ID (SFI) of FE-800 and the external
equipment connected. This SFI must be a unique on network
IEC61162-450. Enter the four-digit number that follows "SD".
Note: The ID must include "SD" to comply with IEC standards.
Reset the working hours of LCD.
[Self TEST]: Show the self test screen.
[LCD TEST]: Show the LCD test screen.
[Buzzer TEST]: Select this menu then the buzzer sounds if it is work-
ing properly. To stop the buzzer, press the ENT key.
Activate the demonstration mode.
corner of the screen when the demonstration mode is turned on.
Reset the menu settings to the default settings. The confirmation
message appears then select [Yes] to reset the settings.
Exit the [Service Menu] then restart the system.
20
3. ADJUSTMENTS
Contents
appears at the bottom-right
SIM
Hide quick links:
Advertisement
Table of Contents
