Raymarine i40 Installation And Operation Instructions Manual page 37

Using the speed pages
1
60 5
55
3
50 10
45 15
20
40
35 25
30
2
60 5
55
3 10
50
45 15
40 20
35 25
30
3
Note: The trip distance reading can only be reset if the unit's
status is set to Master (See the Data master section for details).
1. With the Current speed page displayed:
i. Press the Up button to display the Water temperature page,
or
ii. Press the Down button to display the Maximum speed page.
2. With the Maximum speed page displayed:
i. Press the Up button to display the Current speed page, or
ii. Press the Down button to display the Average speed page,
or
iii. Press and hold the Up button for 3 seconds to reset the
maximum speed reading.
3. With the Average speed page displayed:
i. Press the Up button to display the Maximum speed page, or
ii. Press the Down button to display the Log page, or
iii. Press and hold the Up button for 3 seconds to reset the
average speed reading.
4. With the Log page displayed.
i. Press the Up button to display the Average speed page, or
ii. Press the Down button to display the Trip page.
5. With the Trip page displayed:
i. Press the Up button to display the Log page, or
ii. Press the Down button to display the Current water
temperature page, or
iii. Press and hold the Up button for 3 seconds to reset the trip
reading.
6. With the Current water temperature page displayed:
i. Press the Up button to display the Trip page, or
ii. Press the Down button to display the Current speed page.
Note: Only the Current speed and Current water temperature
pages are permanent pages, all other pages will time out after 5
seconds and revert back to the last permanent page displayed.
Using your display
6
60 5
55
3
50 10
45 15
20
40
35 25
30
5
4
D12511-1
Using the depth pages
1
60 5
55
50 3 10
45 15
40 20
35 25
30
2
60 5
55
3 10
50
45 15
40 20
35 25
30
3
60 5
55
50 3 10
45 15
40 20
35
25
30
4
Note: Alarm and offset pages are only available if the unit's status
is set to Master (See the Data master section for details).
1. With the Current depth page displayed:
i. Press the Up button to display the Depth offset page, or
ii. Press the Down button to display the Minimum depth page.
2. With the Minimum depth page displayed:
i. Press the Up button to display the Current depth page, or
ii. Press the Down button to display the Shallow alarm page, or
iii. Press and hold the Up button for 3 seconds to reset the
minimum depth reading to zero.
3. With the Shallow alarm page displayed:
i. Press the Up button to display the Minimum depth page, or
ii. Press the Down button to display the Deep alarm page, or
iii. Press and hold the Up button for 3 seconds to switch the
shallow alarm on and off.
4. With the Deep alarm page displayed:
i. Press the Up button to display the Shallow alarm page, or
ii. Press the Down button to display the Shallow anchor alarm
page, or
iii. Press and hold the Up button for 3 seconds to switch the
deep alarm on and off.
5. With the Shallow anchor alarm page displayed:
i. Press the Up button to display the Deep alarm page, or
ii. Press the Down button to display the Deep anchor alarm
page, or
iii. Press and hold the Up button to switch the shallow anchor
alarm on and off.
6. With the Deep anchor alarm page displayed:
i. Press the Up button to display the Shallow anchor alarm
page, or
ii. Press the Down button to display the Depth offset page, or
iii. Press and hold the Up button to switch the deep anchor
alarm on and off.
7. With the Depth offset page displayed:
i. Press the Up button to display the Deep anchor alarm page,
or
7
60 5
55
3 10
50
45 15
40 20
35 25
30
6
60 5
55
50 3 10
45 15
40 20
35 25
30
5
D12512-1
37