LG LDV-S504 Owner's Manual page 49

Using the Pan/Tilt/Zoom function
You can control the PTZ cameras via network.
1. Select PTZ camera channel window in the cam-
era view mode.
2. Select Pan/Tilt/Zoom tab.
3. Use virtual remote control buttons to control the
PTZ camera.
g
h
a
v/V/b/B : Use to Pan/Tilt the camera.
: Confirm the preset position and set an
option of menu in the PTZ camera.
b
ZOOM + / -
Adjust the camera zoom.
c
FOCUS + / -
Adjust the focus of a camera manually.
d
IRIS + / -
Adjust the iris of a camera manually.
e
Displays selected preset number
f
Number buttons
Input the preset number.
g
SET
Register preset positions of camera.
h
MOVE
Move the camera to the preset position.
i
CLEAR
Delete a memorized preset position.
j
TOUR
Start preset tour.
k
SETUP
Displays the setup menu of PTZ camera.
Notes :
• If someone is controlling a PTZ camera using the
DVR, you cannot use the PTZ function and vice
versa.
• You can not use the PTZ function when you log in
by the Normal User ID
To register preset positions
1. Move the camera to a point you wish by using the
a
v/V/b/B.
2. Click the [SET] icon.
3. Select preset number you wish to register.
4. Click the [ ] icon.
b
The position and its numbers are memorized.
c
5. Repeat steps 1-4 to add additional position.
d Note :
e
Preset range is available from 0 to 255 on this unit.
But the actual preset range is differ depend on PTZ
f
cameras.
i
Changing to Picture at Preset Position
j
The following function is available only with cameras
k
provided with the preset function.
The preset function makes the combination camera
move to the programmed preset position.
It is necessary to program preset positions for the
combination camera beforehand.
1. Click the [MOVE] icon.
2. Use number icons to enter the memorized preset
position's index number then Click the [ ] icon.
The camera moves to the preset position and the
picture of the camera in that position appears on
the monitor.
49